How To Make Slimline Envelopes with a 1-2-3 Punchboard
Hello Everyone I have a quick post for you today!! How I've been making slimline envelopes with my We R Memory Keepers 1-2-3 Envelope punch board, Let's jump in.
So to start you need to cut down a 12 x 12 piece of cardstock to 9 3/4 x 9 3/4, and you will use 3 1/8 as your punch point, make sure to pull out the arm on the bottom of the punch board or you won't be able to score the long edge. Once the first punch and score are finished you will rotate your cardstock until that scored line fits into the notch then punch and score again, until you have done all 4 sides. I like to use 1/4 inch score tape to adhere my flaps, so it stays together when I mail it.
Also because it's a slimline you will have a little bit of over-hang to trim off, I just use my shears but you could use a paper trimmer instead if you like. This is a bit difficult to explain so I also have a video for you to check out below for a more in-depth look at how I made the slimline envelope.
Thank you so much for stopping by and I hope this was helpful for you !!
We R Memory Keepers 1-2-3 Punch Board
12 x 12 Cardstock
Teflon Bone Folder
1/4 inch Score Tape
Tim Holtz Shears
Tim Holtz Trimmer
Affiliate links are used whenever possible, and when you use those links I get a small commission at no extra cost to you. Thank you for your support!